Concrete Grinding
Las Vegas.
Diamond grinding, coating removal and concrete surface preparation for garages, commercial floors and industrial spaces throughout the Las Vegas Valley. Start with the slab and prepare the surface for whatever comes next.
The Coating Is Only As Good As The Surface Underneath.
Existing coatings, contamination, slab condition and the required surface profile all influence how concrete should be prepared.
What Does Your Floor Need?
Concrete grinding is used for more than one type of project. The right approach depends on what is currently on the slab, the condition of the concrete and what needs to happen next.
Prepare Concrete For A New Coating.
Mechanically prepare bare concrete and create an appropriate surface profile before the next compatible coating system is installed.
Remove Old Epoxy, Paint Or Coatings.
Diamond tooling can be used to mechanically remove many existing floor coatings so the concrete underneath can be evaluated and prepared for its next use.
Remove Adhesive + Surface Residue.
Depending on the material and how strongly it is bonded, mechanical grinding can help remove certain adhesives, residue and surface materials left behind on concrete.
You Coat It. We Prep It.
Installing your own garage floor coating? If the system calls for mechanical preparation, handle the coating yourself and leave the grinding and heavy prep to us.
Not sure what your slab needs? Send the floor size, current surface condition and photos so the project can be reviewed before the work is scoped.
Get A Grinding Estimate →
Grinding Is About
The Surface.
Concrete grinding does more than make a floor look cleaner. Diamond tooling mechanically works the surface of the slab, helping remove certain existing materials and create a surface profile appropriate for the flooring system that comes next.
The goal is not simply to make concrete “rough.” Preparation should match the condition of the slab and the requirements of the coating or flooring system being installed.
What Is A Concrete Surface Profile?
Concrete Surface Profile, commonly shortened to CSP, describes the texture of a prepared concrete surface. Different flooring and coating systems can call for different levels of surface preparation, so the required profile should be matched to the material being installed.
Diamond Tooling
Grinding equipment uses specialized diamond tooling selected according to the concrete and material being removed.
Coating Removal
Existing paint, epoxy and other bonded materials may need to be mechanically removed before the slab can be prepared again.
Surface Profile
Preparation creates a physical surface texture that should correspond with the requirements of the next flooring system.
Slab Condition
Cracks, contamination, repairs and previous coatings should be evaluated separately rather than assuming grinding solves every concrete issue.
Every slab is different. The tooling, removal work and preparation required depend on what is on the concrete now and what the floor needs to become.
Tell Us About Your Floor →
Handle The Coating.
Skip The Heavy Prep.
You Coat It.
We Prep It.
Planning to install your own garage floor coating? You do not necessarily have to handle every part of the project yourself. If your coating system calls for mechanical surface preparation, the grinding and heavy prep can be handled separately before you begin the DIY installation.
What Affects The
Grinding Cost?
Concrete grinding is not priced by square footage alone. Existing coatings, slab condition, removal requirements and detail work can all change the amount of preparation a floor needs.
Square Footage
Floor size affects equipment time, tooling, labor and the overall amount of concrete that needs to be prepared.
Existing Coatings
Removing paint, epoxy, adhesive or another bonded material can require additional passes, tooling and labor before preparation is complete.
Slab Condition
Cracks, damaged concrete, contamination and previous repairs can affect the scope and may require evaluation beyond the grinding itself.
Edges + Detail Work
Walls, corners, columns and other areas inaccessible to larger equipment may require additional edge grinding and detail work.
Why don't we publish one universal per-square-foot price? Two floors with the same dimensions can require very different amounts of preparation depending on the existing surface, material removal, concrete condition and required finish.
From Existing Floor
To Prepared Surface.
The exact process depends on the floor, but the goal is consistent: understand what is on the slab, determine the required preparation, complete the grinding or removal work and leave the surface ready for its next compatible flooring system.
Inspect The Floor
Review the slab, existing coatings, visible damage, contamination and the intended use of the floor.
Define The Prep Scope
Determine what needs to be removed and what surface preparation is appropriate for the flooring system that follows.
Grind + Remove
Use mechanical grinding and suitable diamond tooling to prepare the concrete and remove applicable bonded materials.
Edge + Detail
Address corners, walls, columns and other areas where larger grinding equipment cannot effectively reach.
Clean + Ready
Remove dust and loose material so the prepared concrete can be evaluated and moved into the next stage of the floor project.
Ready To Scope The Floor?
Send the approximate square footage, current surface condition and photos so the grinding or removal work can be reviewed.
From Existing Floor
To Prepared Surface.
The exact process depends on the floor, but the goal is consistent: understand what is on the slab, determine the required preparation, complete the grinding or removal work and leave the surface ready for its next compatible flooring system.
Inspect The Floor
Review the slab, existing coatings, visible damage, contamination and the intended use of the floor.
Define The Prep Scope
Determine what needs to be removed and what surface preparation is appropriate for the flooring system that follows.
Grind + Remove
Use mechanical grinding and suitable diamond tooling to prepare the concrete and remove applicable bonded materials.
Edge + Detail
Address corners, walls, columns and other areas where larger grinding equipment cannot effectively reach.
Clean + Ready
Remove dust and loose material so the prepared concrete can be evaluated and moved into the next stage of the floor project.
Ready To Scope The Floor?
Send the approximate square footage, current surface condition and photos so the grinding or removal work can be reviewed.
Questions Before
You Grind.
Concrete grinding projects can vary depending on the slab, existing coatings and the flooring system planned afterward. These are some of the most common questions about mechanical surface preparation and coating removal.
Many professional coating systems call for mechanical surface preparation, but the exact method should follow the requirements of the material being installed and the condition of the slab.
Grinding can help remove weak surface material, certain existing coatings and contaminants while creating a physical surface profile appropriate for compatible flooring systems.
Depending on the material, thickness and bond to the slab, diamond grinding can be used to remove many paints, epoxy systems and other existing floor coatings.
Strongly bonded or thicker materials may require different tooling, additional passes or more extensive removal work.
They are different preparation methods. Grinding mechanically works the surface and can remove certain bonded materials, while acid etching chemically reacts with exposed concrete.
The appropriate method depends on the floor, the existing surface and the preparation requirements of the coating system being used.
Grinding cost depends on more than square footage. Existing coatings, material removal, slab condition, edge work and the required preparation can all affect the project scope.
Providing floor dimensions, surface information and photos can help make an initial project review more useful.
Get A Grinding Estimate →Yes, concrete containing cracks can still be mechanically prepared, but grinding itself does not repair a crack or prevent future movement in the slab.
Cracks and damaged areas should be evaluated separately so the appropriate repair or flooring approach can be determined.
Concrete Surface Profile, or CSP, describes the texture of a prepared concrete surface. Different flooring and coating systems can require different surface profiles.
The goal of preparation is therefore not simply to make the floor rough. The surface should be prepared to match the requirements of the compatible system being installed.
Yes. Concrete preparation can be handled as a separate scope from the coating installation. This can be useful for homeowners planning a DIY garage floor who want professional help with grinding, coating removal or heavy surface preparation.
Read The Garage Floor Guide →Start With The Slab.
Tell us what is currently on the concrete, approximately how large the floor is and what you need the surface prepared for.
Tell Us About
Your Floor.
Need concrete grinding, coating removal or professional surface preparation? Send the approximate floor size, current surface condition and what you need done so the project can be reviewed.